Resources › Standards › ISO 45001
STANDARDS

ISO 45001

International Standard for Occupational Health and Safety Management Systems

ISO 45001 is the international standard for occupational health and safety (OH&S) management systems. It helps organisations prevent work-related injuries and ill health by identifying hazards and controlling workplace risks. As a result, organisations can keep improving how people plan and carry out their work.

ISO 45001:2018 remains the current published edition. A 2024 amendment also addresses climate change within the management-system context. Meanwhile, ISO is developing a revised edition. However, the draft has not replaced the published standard. In addition, the framework combines leadership accountability, meaningful worker consultation, systematic risk assessment and evidence-based improvement.

The aim goes beyond holding a certificate. A functioning OH&S system connects everyday activities, contractors, equipment, workers and management decisions. As a result, organisations can implement safety improvements and check whether they work. ISO 45001 remains voluntary, while applicable occupational safety legislation is binding regardless of certification.

Published edition March 2018
Climate-action amendment February 2024
Revision status Draft under development
01

What is ISO 45001 and why does it matter?

ISO 45001:2018 specifies requirements for establishing, implementing, maintaining and improving an OH&S management system. Its purpose is to prevent work-related injury and ill health, provide safe workplaces and improve OH&S performance. Organisations with different exposure profiles can use the framework. For example, the framework can serve warehouses, construction businesses, laboratories, offices and service providers.

A hazard is a source or situation with the potential to cause harm. By contrast, risk considers the likelihood and severity of that harm. For example, an unguarded machine presents a hazard. Next, a risk assessment identifies exposed people and explains how harm could occur. It also examines existing safeguards and necessary improvements.

KEY POINT

Effective safety starts with leadership and worker participation.

A strong OH&S system needs management commitment, worker consultation, hazard identification and practical prevention measures. Written policies matter only when organisations apply safer work practices and review their effectiveness.

Organisations should examine routine and non-routine work, including maintenance, cleaning, shift work, travel, contractors and emergency situations. Health hazards can be physical, chemical, ergonomic or psychosocial; exposure may affect employees and others under the organisation’s control. In particular, workers and their representatives can explain how teams carry out tasks in practice. As a result, their insights can reveal risks that written procedures may miss.

ISO 45001 follows a Plan–Do–Check–Act approach. Organisations identify context and hazards, plan and implement controls, assess results and then improve. However, the standard does not prescribe an identical risk matrix or set of procedures for every workplace. Controls should therefore reflect the work and applicable law, including relevant national occupational safety requirements.

EU-OSHA’s practical risk assessment guidance provides a useful step-by-step approach that complements the management-system framework.

Although certification may offer external assurance, it is not a substitute for safe conditions and legal compliance.

02

Who can use ISO 45001?

Organisations of any size or sector can use the voluntary international standard ISO 45001. For example, a business may adopt it to improve prevention or coordinate several sites and contractors. It can also respond to customer expectations or support independently audited OH&S governance. However, applicable legislation establishes employers’ duties to protect workers and assess risks. Importantly, those duties apply regardless of a decision to seek certification.

In the EU, the Framework Directive 89/391/EEC sets general prevention principles. These include assessing unavoidable risks and consulting workers. In turn, national legislation implements those principles and may set stricter requirements.

1

Confirm legal duties

Identify the national and sector-specific occupational safety rules that apply to the workplaces, activities and exposed people. ISO 45001 supports structured management but cannot replace these obligations.

2

Define the system boundaries

Decide which locations, workers, contractors, activities and interfaces the OH&S management system covers. Also include work outside normal hours and relevant outsourced work.

3

Engage leaders and workers

Secure senior-management accountability and consult workers about hazards, controls, reporting barriers and improvement priorities. Participation must be more than signing a policy.

4

Assess the starting position

Review incident trends, existing risk assessments, competence, training, emergency arrangements, contractor controls and current improvement actions. Identify gaps against the standard.

5

Decide whether certification adds value

Independent certification may be commercially useful, but ISO 45001 does not make third-party certification compulsory. Check customer or tender conditions and use an appropriately competent certification body if seeking a certificate.

03

Key requirements of ISO 45001:2018

Seven operational requirement clauses

ISO 45001:2018 follows the harmonised management-system structure shared by several ISO standards. Clauses 4–10 contain the main requirements: organisational context, leadership and worker participation, planning, support, operation, performance evaluation and improvement. The following summaries paraphrase the structure; they are not a substitute for purchasing and reading the standard itself.

The 2024 climate-action amendment adds consideration of whether climate change is relevant to the organisation’s context and interested parties. For OH&S, relevant examples may include heat stress, severe weather or related operating conditions. Therefore, organisations should assess relevance rather than assume every climate-related issue creates a material OH&S risk.

7 Clauses
OH&S requirements, Clauses 4–10
PDCA Cycle
Plan, Do, Check, Act
04
Clause

Context and OH&S scope

Understand internal and external issues, relevant interested parties and the activities within the OH&S system. Then define its scope and the processes required to manage risks and deliver intended safety outcomes. In practice, consider the working environment and workers’ needs, not just a corporate statement.

05
Clause

Leadership and worker participation

Top management is accountable for the system, its policy and the allocation of resources. Leaders must consult workers and enable their participation in relevant OH&S decisions, including hazard identification and control development. They should also remove barriers to reporting and participation, such as fear of reprisal or inaccessible channels.

06
Clause

Hazard identification and planning

Proactively identify hazards and assess OH&S and wider management-system risks. Then determine legal and other requirements, objectives and planned actions. In addition, consider changes, contractors, non-routine tasks and opportunities to improve prevention. Above all, prioritise eliminating hazards and reducing risks rather than relying on personal protective equipment alone.

07
Clause

People, competence and information

Provide the resources, competence, awareness, communication and documented information the system needs. This includes both internal and external communication. For example, training should match tasks and exposure. In addition, workers must understand relevant procedures and be able to report hazards, incidents or control failures.

08
Clause

Operational control and emergency readiness

Plan and control the work activities that create OH&S risks. Apply the hierarchy of controls, manage change, consider procurement and contractors, and prepare for foreseeable emergencies. For example, a warehouse might separate pedestrians from vehicles, set traffic rules and test emergency responses.

09
Clause

Monitoring, audits and management review

Use meaningful indicators and evidence to evaluate OH&S performance. Also assess compliance with legal and other requirements, conduct internal audits and review the system at management level. For example, review completed inspections, overdue control actions, exposure monitoring and trends in near-miss reporting. However, interpret these results in context rather than viewing each result in isolation.

10
Clause

Incidents, corrective action and improvement

Investigate incidents and nonconformities, determine causes, implement corrective actions and evaluate whether controls work. Then feed lessons into processes, training, design and procurement. Ultimately, continual improvement should be visible in safer working conditions, not merely in revised documents.

04

How to implement ISO 45001

A practical nine-stage approach brings ISO 45001 into everyday workplace decisions. Organisations can adapt the sequence to their needs. Throughout the process, worker involvement should support every stage.

SCOPE

Set policy, intended outcomes and scope

Identify activities, locations, work patterns and people who could encounter workplace hazards. Then establish an OH&S policy that fits the organisation and its legal environment.

LEADERSHIP

Assign accountability and worker participation

Clarify management responsibilities, allocate resources and establish practical channels for workers and representatives to raise concerns and contribute to decisions.

HAZARDS

Identify hazards in real work

Walk through routine and non-routine activities with people doing the work. Also include equipment, substances, ergonomics, psychosocial factors, contractors, visitors and foreseeable changes.

ASSESS

Evaluate and prioritise risks

First, identify potential harm and the people it could affect. Then review existing safeguards, assess remaining risks and identify ways to eliminate the hazard. Also record assumptions and use appropriate specialist expertise.

CONTROL

Select and implement prevention measures

Prefer elimination and substitution, followed by engineering and organisational controls before relying on personal protective equipment. Next, give each action an owner, deadline and method for checking effectiveness.

SKILLS

Build competence and communication

Provide role-specific instruction, training, supervision and accessible procedures. Also confirm that temporary staff and contractors understand site-specific risks and emergency arrangements.

EMERGENCY

Prepare for and manage change

Plan for credible emergencies such as fire, chemical release or serious injury, and test responses. In addition, reassess risks when processes, premises, staffing, equipment or materials change.

MEASURE

Inspect, monitor and audit

Choose leading and lagging indicators suited to your hazards. Review legal compliance, run internal audits and conduct management reviews based on actual evidence and worker feedback.

IMPROVE

Investigate, correct and learn

Investigate incidents, near misses and nonconformities without focusing only on individual blame. Correct underlying causes, verify that actions work and update the system as conditions change.

Example: a logistics site may identify vehicle–pedestrian collisions as a priority. It can separate traffic routes, introduce speed and crossing controls, and train contractors. The site can then review near misses and verify controls during inspections instead of relying solely on a risk score.

05

How Blue Octopus supports OH&S risk management

Blue Octopus does not provide ISO 45001 certification. Nor does it replace on-site inspections, medical surveillance, worker consultation, incident investigations or professional OH&S judgement. However, it can help organise asset information, risk analyses, responsibilities and process oversight. Together, these capabilities support selected planning and follow-up tasks within a broader OH&S management system.

Relevant management activity
How Blue Octopus may support it

Context and planning

Structure internal and external analyses, including PESTLE and SWOT, to identify relevant business conditions and improvement priorities.

Risk records

Record and prioritise analysed risks, including initial and residual ratings. Where suitable, use the platform’s risk workflow to document proposed mitigation measures.

Assets and dependencies

Maintain information about relevant equipment or other assets, including owners, classifications and relationships; physical hazard inspections still require specialised evidence.

Responsibilities

Connect mitigation actions with responsible owners and track the decisions needed to address identified issues.

Processes and objectives

Link risk-related findings to business processes and performance indicators where appropriate, supporting management oversight.

Evidence and reporting

Use centralised information and exports to make supporting risk decisions easier to review. However, keep statutory OH&S records and incident investigations in the systems required for them.

For example, a company can assign an owner and track a planned equipment improvement in a risk register. Meanwhile, trained safety staff assess the risk and verify protection on site. Explore the documented Blue Octopus modules when assessing which supporting activities are appropriate.

06
FAQ

Frequently asked questions

Clear answers about ISO 45001, legal duties, certification, hazard assessment and the ongoing revision.

No. ISO 45001 itself is a voluntary management-system standard. Employers must still meet the occupational safety and health legislation applicable to their country, sector and activities. However, particular contracts or tenders may separately require certification.

No. An organisation can use the standard to build and improve its OH&S system without certification. However, independent certification provides a separate form of assurance. In practice, customer or procurement requirements may influence that choice.

ISO 45001 concerns occupational health and safety, including hazard prevention and worker participation. By contrast, ISO 9001 addresses quality management and customer requirements. Even so, the standards share a compatible management-system structure, so organisations can coordinate some governance processes. However, their substantive requirements differ.

First, identify hazards and the people exposed to them. Then assess existing safeguards, choose preventive measures, implement them and review effectiveness. However, the method must suit the workplace and applicable national legislation. For this reason, a numerical matrix alone cannot show that an organisation adequately controls hazards.

ISO 45001:2018/Amd 1:2024 introduces consideration of climate change within the organisation’s context and relevant interested-party requirements. Organisations should determine relevance to their OH&S system, for example where high temperatures or severe weather could affect workers. However, it does not replace existing hazard assessment obligations.

As of 13 November 2026, ISO 45001:2018 remains the published edition. ISO/DIS 45001 is still a Draft International Standard. ISO expects a possible replacement in the first half of 2027. However, the draft is not final; a universal certification transition deadline remains unconfirmed.

07

Official sources and guidance

08

Next step

Start with the work people actually do. Map activities, consult workers, assess significant hazards and prioritise preventive measures with clear owners, resources and review dates. Then use ISO 45001 to check whether controls remain effective. Use the findings to identify where the organisation should improve.

Blue Octopus can help organise selected risk and responsibility information alongside the wider OH&S system. However, the platform cannot make a workplace safe or establish legal compliance on its own. Instead, it can help managers follow up on assigned actions.